MAINTENANCE KIT
MOSTER185 PLUS MY22/25
25/50 HRS MAINTENACE KIT
The 25/50 Hours maintenance kit includes all essential components required to perform the scheduled 25/50 hour maintenance service for the Moster185 MY22 and MY25 engines, helping ensure optimal performance, reliability, and safety.
Suitable for Moster185 Plus MY22 and MY25. For older versions, contact your dealer.
The KIT25/50M22 includes the following
• Qty 1 ACC132 Molykote G-N Plus Paste gr.100• Qty 2 M020 Spark plug NGK BR9ES
• Qty 1 M139 Exhaust spring (Set of 5)
• Qty 4 MP093d Snaplock female Ø 16 mm, grey
• Qty 1 MP140 Heat shrinkable tubing (Set of 5)
• Qty 1 MP141 Security cable 45 cm with aluminum clamp (Set of 5)
• Qty 1 MY202 Bronze bushing 40/50 hours with Springs and Security cables
25/50 HOURS MAINTENANCE CHECKLIST
Every 25 h
CHECK: Screws and nuts (tightening), Carburation from spark plug colour, Carburettor, Kit exhaust bushing (1st joint), Exhaust bushing (2nd joint), Belt tensioning.REPLACE: Spark plug, Airbox Snaplock.
CHECK AND CLEAN: Airbox, Airbox sponge and sleeve,
Every 50 h
CHECK: Spark plug connector, Electric starter.REPLACE: Kit exhaust bushing (1st joint), Exhaust bushing (2nd joint).
MOSTER185 PLUS MY22/25
100/150 HRS MAINTENACE KIT
The 100/150 Hours maintenance kit includes all essential components required to perform the scheduled 100/150 hour maintenance service for the Moster185 MY22 and MY25 engines, helping ensure optimal performance, reliability, and safety.
Suitable for Moster185 Plus MY22 and MY25. For older versions, contact your dealer.
The KIT100/150M25 includes the following
• Qty 1 AT093a Air-box rubber manifold with incorporated sponge• Qty 1 M005 Bearing 47/20/14 mm - C3 (Set of 2)
• Qty 1 M006 Oil seal viton 20/35/7 mm (Set of 2)
• Qty 1 M009 Piston roller bearing
• Qty 15 M019 Copper lock nut high temperature 8 x 1,25 mm
• Qty 2 M020 Spark plug NGK BR9ES
• Qty 1 M021a Antivibration mount 30 x 30 mm - M8 x 15 mm (Set of 2)
• Qty 1 M021b Antivibration mount 30 x 30 mm - M8 x 25 mm (Set of 2)
• Qty 1 M021f Security band (Set of 2)
• Qty 1 M025 Complete series of gaskets and O-ring
• Qty 1 M031a Spark-plug cap (Selettra)
• Qty 1 M043 Starter rope 2,20 meters
• Qty 1 M082 Reed valve petal (Set of 2)
• Qty 2 M094 Fixing band 50-70 mm
• Qty 1 M097 Series membranes and Gaskets Walbro WB
• Qty 1 M114 Bearing 42/20/12 mm (Set of 2)
• Qty 1 M139 Exhaust spring (Set of 5)
• Qty 1 M141a Fixing Kit for silencer's bracket
• Qty 1 M151a Antivibration mount 30 x 20 mm soft (left) 14/20 mm with Nuts
• Qty 1 M151c Antivibration mount 30 x 20 mm hard (right) 14/14 mm with Nut
• Qty 1 MP055k Kit Plastic hook (Set of 2) with Shim washers 12 x 18 mm (Set of 6) and Elastic ring
• Qty 4 MP093d Snaplock female Ø 16 mm, grey
• Qty 1 MP102 Complete clutch
• Qty 5 MP105 Seeger Ø 35 mm DIN 472
• Qty 1 MP106 Bearing 35/15/11 mm - 2Z and Bearing 35/15/11 mm - 2HRS
• Qty 5 MP107 Seeger Ø 15 mm DIN 471
• Qty 2 MP107a Drum/Pinion cap
• Qty 1 MP117 Belt Poly V PJ483 13 grooves
• Qty 1 MP140 Heat shrinkable tubing (Set of 5)
• Qty 1 MP141 Security cable 45 cm with aluminum clamp (Set of 5)
• Qty 1 MP159 Noise absorbent material with Rivets
• Qty 1 MI200a Exhaust black (initial part), with double bronze bushing and EGT probe preset
• Qty 1 MY201 Exhaust flange with assembled Bushing 40/50 hours and Springs
• Qty 5 M109 Seeger Ø 20 mm DIN 471
• Qty 5 M115 Seeger Ø 42 mm DIN 472
100/150 HOURS MAINTENANCE CHECKLIST
Every 100 h
CHECK: Screws and nuts (tightening), Carburation from spark plug colour, Carburettor, Kit exhaust bushing (1st joint), Exhaust bushing (2nd joint), Belt tensioning.REPLACE: Spark plug, Airbox Snaplock.
CHECK AND CLEAN: Airbox, Airbox sponge and sleeve,
Every 150 h
CHECK: Reed valve petals, CHT sensor (Optional), EGT sensor (Optional).CLEAN: Carburettor.
MEASURE: Piston.
CLEAN AND MEASURE: Head and cylinder.
REPLACE: Carburettor membranes, Airbox sponge and sleeve, Pull starter system, Gaskets (cylinder, carburettor, reed valve, exhaust, silencer), O-ring head, Belt.
COSMOS300 MY22/25
25/50 HRS MAINTENACE KIT
The 25/50 Hours maintenance kit includes all essential components required to perform the scheduled 25/50 hour maintenance service for the Cosmos300, helping ensure optimal performance, reliability, and safety.
Suitable for all versions of Cosmos300. For any questions, contact your dealer.
The KIT25/50M22 includes the following
Qty 1 ACC132 Molykote G-N Plus Paste gr.100Qty 1 C082 Reed valve petal (Set of 2)
Qty 1 C202 Bronze bushing 40/50 hours, with Springs and Security cables
Qty 1 C120 Oil for reduction gear, 250ml
Qty 4 M020 Spark plug NGK BR9ES
Qty 1 M139 Exhaust spring (Set of 5)
Qty 4 MP093d Snaplock female Ø 16 mm, grey
Qty 1 MP140 Heat shrinkable tubing (Set of 5)
Qty 1 MP141 Security cable 45 cm with aluminum clamp (Set of 5)
25/50 HOURS MAINTENANCE CHECKLIST
Every 25 h
CHECK: Screws and nuts (tightening), Carburation from spark plug colour, Carburettor, Airbox Snaplock, Reed valve petals, Kit exhaust bushing (1st joint), Exhaust bushing (2nd joint).CHECK AND CLEAN: Airbox, Airbox sponge and sleeve,
Every 50 h
CHECK: Spark plug connector, Electric starter.REPLACE: Airbox Snaplock, Reed valve petals, Kit exhaust bushing (1st joint), Exhaust bushing (2nd joint)
COSMOS300 MY22/25
100/150 HRS MAINTENACE KIT
The 100/150 Hours maintenance kit includes all essential components required to perform the scheduled 100/150 hour maintenance service for the Cosmos300, helping ensure optimal performance, reliability, and safety.
Suitable for all versions of Cosmos300. For any questions, contact your dealer.
The KIT100/150M25 includes the following
Qty 1 ACC085 Coolant for radiator 1 LQty 1 AT093a Air-box rubber manifold with incorporated sponge
Qty 1 C021 Antivibration mount 40 x 30 mm - M8 x 25 mm with Nuts (Set of 4)
Qty 1 C021f Security band (Set of 4)
Qty 1 C025 Complete series of gaskets and O-ring
Qty 1 C082 Reed valve petal (Set of 2)
Qty 1 C097 Series membranes and gaskets Tillotson
Qty 1 C120 Oil for reduction gear, 250ml
Qty 1 C140 Silencer fixing kit
Qty 1 C151 Antivibration mount 30 x 30 mm 15/20 mm (Set of 3)
Qty 1 C159 Set of 2 noise absorbent material with Rivets
Qty 1 C201 Exhaust flange, with assembled Bushing 40/50 hours and Springs
Qty 4 M020 Spark plug NGK BR9ES
Qty 2 M031a Spark-plug cap (Selettra)
Qty 1 M043 Starter rope 2,20 meters
Qty 2 M094 Fixing band 50-70 mm
Qty 1 M139 Exhaust spring (Set of 5)
Qty 1 MP055k Kit Plastic hook (Set of 2) with Shim washers 12 x 18 mm (Set of 6) and Elastic ring
Qty 4 MP093d Snaplock female Ø 16 mm, grey
Qty 1 MP140 Heat shrinkable tubing (Set of 5)
Qty 1 MP141 Security cable 45 cm with aluminum clamp (Set of 5)
100/150 HOURS MAINTENANCE CHECKLIST
Every 100 h
CHECK: Radiator hoses, Radiator rubbers, H2O sensor (Optional), EGT sensor (Optional).REPLACE: Airbox sponge and sleeve, Pull starter system, Soundproofing material silencer, Gaskets (head, cylinder, carburettor, reed valve, exhaust, transmission, water pump), .
CHECK AND CLEAN: Carburettor, Piston