object(WP_Post)#4986 (24) { ["ID"]=> int(1499) ["post_author"]=> string(1) "1" ["post_date"]=> string(19) "2020-04-27 08:30:00" ["post_date_gmt"]=> string(19) "2020-04-27 06:30:00" ["post_content"]=> string(644) "For the Atom80 model: the reduction is only 1/3,8. For the Moster185 model, there are two possible solutions: 1/2,68 and 1/2,87. On the rear part of the larger pulley is engraved a number representing the diameter in millimeters. The number 128 corresponds to the reduction 1/2,68; the number 130 corresponds to the reduction 1/2,87. For the Fly100evo model, there are three possible solutions: 1/3,3; 1/3,6; 1/4. A number representing the reduction ratio is engraved on the hub of the engine. The number 3 corresponds to the reduction 1/3,3; The number 6 corresponds to the reduction 1/3,6; The number 4 corresponds to the 1/4 reduction." ["post_title"]=> string(47) "How do I know the reduction ratio of my engine?" ["post_excerpt"]=> string(0) "" ["post_status"]=> string(7) "publish" ["comment_status"]=> string(6) "closed" ["ping_status"]=> string(6) "closed" ["post_password"]=> string(0) "" ["post_name"]=> string(71) "i-would-like-to-understand-if-my-propeller-is-approved-how-do-i-do-it-2" ["to_ping"]=> string(0) "" ["pinged"]=> string(0) "" ["post_modified"]=> string(19) "2021-11-15 09:38:26" ["post_modified_gmt"]=> string(19) "2021-11-15 08:38:26" ["post_content_filtered"]=> string(0) "" ["post_parent"]=> int(0) ["guid"]=> string(113) "http://www.vittorazi.com/faq/%categoria%/i-would-like-to-understand-if-my-propeller-is-approved-how-do-i-do-it-2/" ["menu_order"]=> int(7) ["post_type"]=> string(3) "faq" ["post_mime_type"]=> string(0) "" ["comment_count"]=> string(1) "0" ["filter"]=> string(3) "raw" }