object(WP_Post)#4989 (24) { ["ID"]=> int(1452) ["post_author"]=> string(1) "1" ["post_date"]=> string(19) "2020-04-27 08:12:01" ["post_date_gmt"]=> string(19) "2020-04-27 06:12:01" ["post_content"]=> string(3570) "

The propeller used is not approved by Vittorazi	Replace it.
The spark-plug is worn out or defective	Replace it.
Wrong carburetion	Reset the standard carburetion.
Carburetor problem	Disassemble and inspect.
Carburetor membranes worn out	Replace it.
Problem to the cylinder or piston	Check each part carefully.
The electric system has a problem	Check that there is no breakage of the cables or ground contacts. Check the correct installation.
The ignition coil has a problem	Replace it.
Fuel line is not working properly	Check the junctions, replace the aged pipeline and the primer bulb
Dirty gasoline filter	Replace it.
The gasoline is dirty, is aged, there is water or has a wrong percentage of oil	Empty the tank and replace the fuel.
Aspiration of air from the joints	Control and replace, where necessary, the gaskets, O-ring or oilseals.
Aspiration blocked; exhaust or silencer blocked	Check each part carefully.
The reed valve is worn out	Replace the petals.
The transmission is damaged	Check the condition of the belt, clutch and bearings

" ["post_title"]=> string(55) "The motor starts well but the power is unstable or poor" ["post_excerpt"]=> string(0) "" ["post_status"]=> string(7) "publish" ["comment_status"]=> string(6) "closed" ["ping_status"]=> string(6) "closed" ["post_password"]=> string(0) "" ["post_name"]=> string(57) "the-motor-starts-well-but-the-power-is-unstable-or-poor-4" ["to_ping"]=> string(0) "" ["pinged"]=> string(0) "" ["post_modified"]=> string(19) "2020-05-10 09:10:08" ["post_modified_gmt"]=> string(19) "2020-05-10 07:10:08" ["post_content_filtered"]=> string(0) "" ["post_parent"]=> int(0) ["guid"]=> string(99) "http://www.vittorazi.com/faq/%categoria%/the-motor-starts-well-but-the-power-is-unstable-or-poor-4/" ["menu_order"]=> int(117) ["post_type"]=> string(3) "faq" ["post_mime_type"]=> string(0) "" ["comment_count"]=> string(1) "0" ["filter"]=> string(3) "raw" }