object(WP_Post)#4989 (24) {
["ID"]=>
int(1428)
["post_author"]=>
string(1) "1"
["post_date"]=>
string(19) "2020-04-27 08:02:41"
["post_date_gmt"]=>
string(19) "2020-04-27 06:02:41"
["post_content"]=>
string(1138) "Carry out a series of controls on the system, as listed below and verify that:
the battery is fully charged to 100%. Check the nominal state of charge of the battery.
the battery is not damaged, despite the correct reading of the voltage.
the battery is adequate in terms of Voltage and Inrush Current.
the charger is adequate and that the battery is fully charged each time.
there are no current draws from the battery to the starter motor: for example, the cables are too long, the cable section is too small or other.
that there is no problem coming out from the electrical system: for example, the inadequate Relay, there are irregular absorption or other.
At this link you can download the installation instructions for the electric starter system.
In the event that all the above checks are negative, it is necessary to contact your dealer who will examine the problem in detail."
["post_title"]=>
string(53) "The electric starter does not work. What should I do?"
["post_excerpt"]=>
string(0) ""
["post_status"]=>
string(7) "publish"
["comment_status"]=>
string(6) "closed"
["ping_status"]=>
string(6) "closed"
["post_password"]=>
string(0) ""
["post_name"]=>
string(51) "the-electric-starter-does-not-work-what-should-i-do"
["to_ping"]=>
string(0) ""
["pinged"]=>
string(0) ""
["post_modified"]=>
string(19) "2020-06-10 16:02:50"
["post_modified_gmt"]=>
string(19) "2020-06-10 14:02:50"
["post_content_filtered"]=>
string(0) ""
["post_parent"]=>
int(0)
["guid"]=>
string(93) "http://www.vittorazi.com/faq/%categoria%/the-electric-starter-does-not-work-what-should-i-do/"
["menu_order"]=>
int(68)
["post_type"]=>
string(3) "faq"
["post_mime_type"]=>
string(0) ""
["comment_count"]=>
string(1) "0"
["filter"]=>
string(3) "raw"
}
The electric starter does not work. What should I do?
Carry out a series of controls on the system, as listed below and verify that:
the battery is fully charged to 100%. Check the nominal state of charge of the battery.
the battery is not damaged, despite the correct reading of the voltage.
the battery is adequate in terms of Voltage and Inrush Current.
the charger is adequate and that the battery is fully charged each time.
there are no current draws from the battery to the starter motor: for example, the cables are too long, the cable section is too small or other.
that there is no problem coming out from the electrical system: for example, the inadequate Relay, there are irregular absorption or other.
At this link you can download the installation instructions for the electric starter system.
In the event that all the above checks are negative, it is necessary to contact your dealer who will examine the problem in detail.
Progetto cofinanziato dal Fondo Europeo di Sviluppo Regionale
Il progetto prevede, a partire da risultati di ricerca già acquisiti, l'ingegnerizzazione e l'industrializzazione di un nuovo prodotto, il motore Mule250.
OBIETTIVI
Il progetto ha tra gli obiettivi: l'ingegnerizzazione e prototipazione esecutiva del nuovo motore, il miglioramento delle caratteristiche prestazionali e tecniche del prodotto, l'industrializzazione del nuovo motore, la promozione del prodotto innovativo e sviluppo della fase di commercializzazione per il nuovo mercato.
RISULTATI
Ingegnerizzare, industrializzare e produrre il nuovo motore Mule250 da proporre a un nuovo settore di clientela, acquisendo una fetta di mercato importante per lo sviluppo dell'impresa.
Investimento totale: 687.291,60 euro | Finanziamento pubblico: 337.675,80