object(WP_Post)#4989 (24) { ["ID"]=> int(1353) ["post_author"]=> string(1) "1" ["post_date"]=> string(19) "2020-04-27 00:54:25" ["post_date_gmt"]=> string(19) "2020-04-26 22:54:25" ["post_content"]=> string(961) "Yes, it is. A conversion kit (code: AT100) has been studied to update the engine. The assembly of the kit requires the intervention of authorized and qualified personnel. What are the advantages of the new MY20 carburettor? The new carburettor has two settings, L for low revolutions and H for high revolutions of the engine, unlike the previous one which had only one setting, for Low revs. The double adjustment allows greater versatility of setting of the Atom80 engine, this to compensate for pressure variations or altitude, temperature or humidity. The MY20 carburettor offers perfect control of revs even between 4000 and 6000 RPM, which is rarely used in flight because it is below cruising speed. The maximum engine power is the same, as in the previous version. Consumption is very similar across the whole RPM range, improved in the gap from 4000 to 6000 RPM. The ignition of the engine and the idle are excellent as in the previous version." ["post_title"]=> string(77) "I would like to update the carburettor to the new MY20 model. Is it possible?" ["post_excerpt"]=> string(0) "" ["post_status"]=> string(7) "publish" ["comment_status"]=> string(6) "closed" ["ping_status"]=> string(6) "closed" ["post_password"]=> string(0) "" ["post_name"]=> string(75) "i-would-like-to-update-the-carburettor-to-the-new-my20-model-is-it-possible" ["to_ping"]=> string(0) "" ["pinged"]=> string(0) "" ["post_modified"]=> string(19) "2020-05-10 09:46:10" ["post_modified_gmt"]=> string(19) "2020-05-10 07:46:10" ["post_content_filtered"]=> string(0) "" ["post_parent"]=> int(0) ["guid"]=> string(117) "http://www.vittorazi.com/faq/%categoria%/i-would-like-to-update-the-carburettor-to-the-new-my20-model-is-it-possible/" ["menu_order"]=> int(207) ["post_type"]=> string(3) "faq" ["post_mime_type"]=> string(0) "" ["comment_count"]=> string(1) "0" ["filter"]=> string(3) "raw" }